Fishing boat maintenance

The first thing to check is the battery charge. It should be full of charge and acid. Be careful not to overcharge your battery. This will boil the acid out and will reduce the life of battery considerably.

Here is our guide to maintaining your fishing boat.

The first thing to check is the battery charge. It should be full of charge and acid. Be careful not to overcharge your battery. This will boil the acid out and will reduce the life of battery considerably.

If your fishing boat has problems starting, check the kill switch lanyard. Sometimes, the lanyard cap weakens and the button on the kill switch will be jammed in stop mode. To check, remove the lanyard and press the button. If the engine starts, replace the lanyard with a new one.

Next thing to do is check your fishing boat connections. Fuel and oil hoses tend to leak, allowing air inside.

If hoses or connections appear hard, replace the hose and the clamp.

Next, check the engine mounting bolts, and the steering cables by moving them in both directions. If they don’t move easily then you can grease the cables. If the cables are still difficult to move, then change them.

Inspect the lower unit, checking there is no water in the oil. The oil should be full.

Check there is no fishing line tangled around the shaft of the propeller. While the propeller is off, grease the prop shaft splines.

Now check the power trim and tilt. Tilt the engine to the up position and remove the plug. The oil level should be level with the threads.

It’s also important to check the wiring on your fishing boat. The wiring may have deteriorated on your fishing boat, especially if it has been stored for sometime. If this is the case, be sure to replace any wiring. Ignoring this could lead to a dangerous accident.

Make sure you check the bilge pump and aerator for cracks. And finally, check the plug is on drain.

Don’t neglect your fishing boat trailer. This will also require regular maintenance. Check the hub bearings and replace if necessary. Check for signs of water or rough spots on bearings. Grease the trailer jack, and check the wiring and lights.

Maintaining your fishing boat and trailer will ensure your boat lasts longer. That means more fishing trips for you! You’ll find that putting a little effort into the maintenance of your fishing boat will pay dividends in the end.

For search new and used fishing boats for sale please visit www.fishing-boat-market.com

More Fishing Boats Articles

Aluminum Fishing Boats: From Compact Jon Boat to Custom Design!

Looking around on the web for an aluminum fishing boat? You’ll soon enough find out there are a number of different ways to go, depending on your needs and budget…

Are you looking for something very straightforward and uncomplicated you can quickly fit on your pickup? Or maybe you want something more sophisticated you can use for both tournament fishing and recreational fishing?

Another option – if money isn’t your biggest concern – could be to look into a custom built boat with everything just the way you want!

You will probably know why you’re looking for an aluminum fishing boat as opposed to a fiberglass or steel boat, but lightness (greater performance or fuel savings) and strength (around 35,000 pounds per square inch (psi) will deform it as opposed to 30,000 psi for mild steel) are probably the greatest advantages.

Price also comes into play as many an aluminum fishing boat owner have reported looking around for similar fiberglass boats and being put off by the prices.

In addition it is not only the purchase price, but also the maintenance costs afterwards which one need to take into account.

Aluminum is practically maintenance-free. If left unpainted aluminum will form a supertight layer of aluminum oxide on its surface and then will stay that way indefinitely.

What else is great about owning an aluminum fishing boat? Aluminum is fireproof and non-toxic; it is natural, and the most abundant metal in the earth’s crust. It is easily repairable, and a great advantage for boats: aluminum won’t absorb water!

What about price? Well, you can start looking at something that was designed to fit right into small pickup truck beds like a Meyers Explorer 12 Jon Boat. This one goes for only a few hundred dollars!

Then you can move up to something much more advanced like the Tracker Pro Angler V-16. The Tracker features large lockable rod storage that holds up to 7’6″ rods, divided aerated livewell with Flow-Rite aeration, a deluxe console with a simulated burlwood switch panel and more.

On the Tracker there’s always plenty of room for tackle, people and gear. Even an amateur would know that this was a great aluminum fishing boat after only one ride!

Then there’s the Ranger Cherokee 217, which is known for an extremely wide front casting deck. It also features an extension-deck option to make it even bigger. (Note: Unfortunately Ranger stopped making them, but if you can find one, rest assured it’s a solid boat. Crestliner’s boats can now offer a similar quality in a bass boat).

You may also want to look at unique boats like those of Design Concepts. Their aluminum fishing boats are crafted with a revolutionary hull configuration called Drop-Keel. Instead of being flat on the bottom like other boats, Design Concepts boats are engineered to drop just below the water line before turning upward at the bow. This feature keeps the cutting edge of your boat in the water at all times.

Design Concepts also offer a “true lifetime warranty”: even if you sell your boat, the warranty stays with it, ensuring you the highest value retention of any boat you can buy.

How about a custom-built aluminum fishing boat? As an example, King Salmon Marine lets you choose many details like the position of the console, overall length and hight, bottom width and thickness – even the type of aluminum alloy!

Written by batibatu

fishing at Torup strand, northern Denmark , the last harbour-less fishing fleet in Denmark , shot in may 2008

More Fishing Boats Articles

A Good Sport Fishing Website

Sport fishing is considered the most popular sport in coastal areas of America and such coastal sport fishing is called as the saltwater sport fishing. Saltwater sport fishing is mostly done with the saltwater fishing gear. However, it has much risk people get into saltwater sport fishing to gain higher ranks and higher trophies. It might require much special equipments in comparison to the ordinary sport fishing. Apart from the differences in equipments, the target too differs in saltwater sport fishing. The target would be very large fishes, and you would need to dive much deeper into the ocean.

Kayak fishing is considered one of the challenging and stealthy ways to get fishes. This kayak fishing uses the kayak fishing gear to reach certain fish-wealthy areas that could otherwise be not reached from land or from a coastal region.

Sport fishing report is maintained nowadays to keep account of the fishes that are caught a tagged. This method is now widely adapted because of the environmental restrictions in killing fishes. Instead of killing fishes nowadays, sport fishing is done by catching fishes and then tagging them as a mark of victory and then letting them continue their journey. Instead of marking victory with the dead fish, people started marking victory through tags and sport fishing reports. This report is then sent to the Government agencies for further maintenance.

Using sport fishing gear for sport fishing must abide by the rules and regulations of the local Government. There are different types of sport fishing gears available. One might choose the most appropriate type depending on the type of sport fishing being done. Sometimes you might be interested in saltwater sport fishing, and therefore, you must go into using saltwater fishing gear. Discount in fly-fishing gears is also available.

Written by dedi

Find More Fishing Boats Articles